10000mAh Capacity for Longer Operating Time
The LGX06100 Lithium-ion Battery Pack provides 10000mAh capacity in a 22.2V 6S2P configuration, making it suitable for applications where operating duration is a primary battery-selection requirement.
Within the standard-discharge LGX range, the LGX06100 provides a higher energy option for systems that need more runtime without moving immediately to the physically larger 12000mAh and 13500mAh platforms.
Higher Energy Within a Compact Pack Footprint
According to the provided specifications, the LGX06100 measures approximately 145 × 65 × 45 mm and weighs 0.9 kg.
This gives system designers a 10000mAh capacity option within the same stated size and weight class as the lower-capacity LGX06080 and LGX06090 models.
This can be particularly useful where the design is constrained by:
- available battery compartment space
- aircraft weight limits
- required operating duration
- 22.2V system architecture
- overall energy-to-size requirements
10C Continuous Discharge for Sustained Loads
The LGX06100 supports 10C continuous discharge, providing the current capability required for sustained operation in systems with moderate load profiles.
A 15C maximum discharge rating gives the pack additional headroom for short-duration increases in current demand.
Its discharge profile is therefore better aligned with applications that prioritize energy capacity and endurance rather than continuous high-rate power output.
For platforms requiring substantially higher sustained current, Lithogenix’s HR-series LGX models are positioned around dedicated high-discharge performance.
22.2V 6S2P Battery Architecture
The LGX06100 uses a 6S2P architecture with a nominal voltage of 22.2V.
This configuration combines six series cell groups to reach the required operating voltage, while the parallel structure supports the pack’s capacity and current characteristics.
During integration, the pack should be matched to the complete system, including:
- motor and ESC voltage
- average current consumption
- peak current requirements
- expected operating duration
- available battery space
- total system weight
Built for Endurance-Focused UAV Systems
The LGX06100 is best suited to UAV platforms where additional battery capacity can support longer missions without introducing the substantially higher discharge characteristics of the HR range.
Potential applications include:
- inspection UAVs
- surveying and mapping drones
- aerial monitoring platforms
- imaging and data-collection systems
- industrial drones
- general-purpose commercial UAVs
The final achievable flight time will depend on aircraft efficiency, payload, propulsion system, flight profile, weather conditions, and total takeoff weight.
A Middle Ground Before Larger Pack Formats
Within the LGX range, the LGX06100 fills the gap between compact lower-capacity packs and the larger 12000mAh / 13500mAh configurations.
It is particularly relevant when the application requires:
- higher usable energy
- longer operating duration
- compact pack dimensions
- stable 10C continuous discharge
- moderate peak-current capability
- 22.2V compatibility
This makes it a practical option for systems where increasing runtime is more important than maximizing discharge rate.
Battery Selection Starts with the Application
Lithogenix evaluates voltage, runtime, peak current, available space, operating temperature, service life, and target cost together when defining an appropriate battery architecture.
The LGX06100 should therefore be selected according to the complete operating profile of the equipment rather than capacity alone. Where a standard configuration does not fully meet the project requirements, Lithogenix can also support application-specific lithium-ion battery pack development.