Balanced Energy and Power for UAV Applications
The LGX06080 Drone & UAV Battery Pack combines an 8000mAh capacity with a 22.2V 6S2P configuration, providing a practical energy platform for unmanned aircraft that require dependable flight time without moving into very high-discharge battery architectures.
With a 10C continuous discharge rate and 15C maximum discharge capability, the LGX06080 is suited to UAV systems with moderate and relatively predictable power demand, including platforms where endurance, battery weight, and stable output need to be considered together.
8000mAh Capacity for Extended Operating Time
Battery capacity has a direct influence on achievable flight duration, but higher capacity must always be balanced against weight and aircraft power requirements.
The LGX06080 provides 8000mAh of capacity at 22.2V, giving UAV designers a useful energy reserve for missions where operating time is an important design consideration.
Its specification makes it particularly relevant to applications where the battery must support sustained flight rather than short-duration, extremely high-current operation.
10C Continuous Discharge for Stable Flight Loads
The LGX06080 supports a 10C continuous discharge rate, allowing the pack to provide sustained current during normal UAV operation.
It also supports up to 15C maximum discharge, providing additional current capability when short-term load increases occur.
This discharge profile makes the LGX06080 better suited to systems with balanced power requirements than to high-performance UAVs requiring sustained 30C, 35C, or 45C discharge rates.
For higher-load platforms, Lithogenix offers dedicated HR battery pack configurations within the LGX series.
Compact 6S2P Battery Architecture
The 6S2P configuration provides a nominal pack voltage of 22.2V while combining parallel cell groups to achieve the required capacity and discharge characteristics.
With dimensions of approximately:
145 × 65 × 45 mm
the pack can be integrated into UAV platforms where battery compartment dimensions and weight distribution must be carefully managed.
The specified pack weight is approximately 0.9 kg.
Designed Around Flight Endurance
The LGX06080 is most appropriate for UAV applications where the battery system prioritizes:
- practical flight endurance
- stable continuous discharge
- moderate peak-current capability
- manageable battery weight
- compact pack dimensions
- predictable energy delivery
This makes it a suitable starting point for drone and UAV platforms that do not require the substantially higher discharge capability of Lithogenix HR-series packs.
Suitable UAV Applications
The LGX06080 can be considered for battery-powered UAV systems such as:
- industrial drones
- inspection UAVs
- mapping and surveying drones
- monitoring platforms
- aerial imaging systems
- general-purpose commercial UAVs
Final suitability should be evaluated against the aircraft’s motor configuration, average and peak current demand, required flight time, payload, available battery compartment, and total takeoff weight.
Pack Selection Should Follow the Aircraft Requirements
Lithogenix develops lithium-ion battery packs around the electrical and mechanical requirements of the finished application. Voltage, runtime, peak current, available space, operating conditions, service-life expectations, and target cost all influence the appropriate battery architecture.
For UAV projects where the LGX06080 does not fully match the required current, capacity, dimensions, or voltage, other LGX configurations or application-specific battery pack solutions can be evaluated. Lithogenix’s broader battery-pack approach supports both established platforms and application-specific configurations.